A Six channel 0-10v DC control board. This board features six individually controllable 0-10v outputs. With up to 16-bit control resolution on each output you can provide precise control signals to many devices. Use it to control lighting drivers, motor controls, and anything else you can think of.
The board also the ability to take six general purpose inputs to allow interfacing to switches or control signals. The inputs are 12v tolerant making them ideal for connection to numerous control systems. Use them as triggers for stand alone operation of the board, or monitor them over Ethernet or USB connections.
At the heart of the board is an ARM Cortex M0 LPC11U24 processor from NXP, running at 48MHz. It features a ROM based USB peripheral stack, which allows quick easy updating of its firmware. It appears as a mass storage device and you can simply drag and drop your new HEX file to it.
You can add Ethernet control by attaching the board to our SplashBase, or PC control over USB, or even stand alone control by writing your own application code.
What is a SolderBridge
It’s our name for a board that stacks on top of a SplashBase, many of them can even operate as stand-alone boards and control other SolderBridges making them very flexible tools. The 0-10v SolderBridge communicates to the base board via SPI allowing up to 5 SPI SolderBridges to be used at one time. It also has the ability to become the Master of the bus and control the chip select lines for use without a SplashBase.
Where do you get one?
Register your interest to buy this SolderBridge
- Download the free LpcXpresso IDE here
- Coming soon : source code and compiled hex for the 0-10v SolderBridge as well as other example code
- 0-10v SolderBridge Schematic v1.0